Reward points:
Purchasing this will earn you 200700 rewards points! See the Policies page for details.

Description:

Manufacturer's website

RECEIVER SPECIFICATIONS

- Receiving System: Dual independent RF sections, automatic-switching diversity

- Image Rejection: 60 dB typical

- Signal-to-noise Ratio: 115 dB at 40 kHz deviation (IEC-weighted, 75 kHz maximum modulation)

- Total Harmonic Distortion: <=1 percent (10 kHz deviation at 1 kHz)

- Sensitivity: 20 dBuV (S/N 70 dB at 5 kHz deviation, IEC-weighted)

- Intermediate Frequency: 65.75 MHz, 10.7 MHz

- Audio Output - Microphone: (ATTN switch at 0) 25 mV (at 1 kHz, ±5 kHz deviation, 10k ohm load)

- Audio Output - Instrument: (ATTN switch at 0) 50 mV (at 1 kHz, ±5 kHz deviation, 10k ohm load)

- Audio Output Attenuator (ATTN): Three-position switch: 0 / -6 / -12 dB

- Output Connectors (Microphone): XLRM-type (balanced)

- Output Connectors (Instrument): 1/4 in (6.3 mm) TS unbalanced phone jack

- Headphone Output Connector: 1/4 in (6.3 mm) TRS (stereo) phone jack

- Power Output: 10 mW + 10 mW at 1 kHz, ±5 kHz deviation into 32 ohms; maximum output, 220 mW + 220 mW into 32 ohms.

- Antenna Power: DC 10V-12V, 20 mA (BNC-type jack)

- Power Supply: 100-240V AC 50/60 Hz; 8W

- Dimensions: 8.31 in (211.0 mm) W x 1.74 in (44.0 mm) H x 9.26 in (235.0 mm) D Net Weight 3.8 lbs (1.7 kg)

- Accessories Included: Detachable IEC-type AC power cable; two flexible UHF half-wave antennas; link cable; rack-mount adapters

Alternate part numbers and similar products: AEW-R4100C, AEW-R4100D, AEW-R4100, AEW-4100