Reward points:
Purchasing this will earn you 75600 rewards points! See the Policies page for details.

Description:

Manufacturer's website

Download Manual

---

Remote control your system from any location. These devices fit in standard wall boxes and use low gauge wire for hook-up. They are available in white and can be covered with a standard decora plate (not included). Labels for these devices can be made with a template (download Word Document Template above). e versions are available to fit standard european wall boxes.

WR-5
The WR-5 is a microprocessor-based remote control unit for use with NE Series Amplifiers and processors and the Protea 24.24M. The WR-5 is designed to fit into a standard electrical wall box for remote control of assignable functions. Connections are standard Euroblock-type. Up to 4 WR-5’s can be daisy-chained and powered by the controlled product. Additional units can be used with a separate, outboard power supply. A pocket is provided in the adhesive overlay to allow the user to easily fabricate/change the button labels.

The WR-5 has six programmable function buttons, each with an LED, Up/Down buttons for incrementing/decrementing volume level, preset selection, etc., and a two-character alphanumeric display.

Each of the six buttons can each be programmed to engage one of the following functions:

1. Preset Recall – Immediately recall an assigned preset.

2. Preset Scroll – Allows user to select any of the allowed presets via the up/down arrow button shown by the alphanumerical display.

3. Gain Control – Allows volume control of assigned inputs/outputs.

4. Channel Mute – Allows mute control of assigned inputs/outputs.

5. Zone Source Selection – Allows for on/off control of assigned inputs, but only for a specific output.

---

Alternate part numbers and similiar products: WR-5