Reward points:
Purchasing this will earn you 37200 rewards points! See the Policies page for details.

Description:

Manufacturer's website

The new Artist Series vocal condenser microphone is tailored for exacting detail and high-fidelity vocal reproduction. With a condenser design for studio-quality performance, the ATM710 delivers remarkable clarity. The microphone is equipped with an integral 80 Hz hi-pass filter that provides easy switching from a flat frequency response to a low-end roll-off position that reduces the microphone's sensitivity to popping in close vocal use. The ATM710 is also equipped with a switchable 10 dB pad that lowers the microphone's sensitivity, providing higher SPL capability. The microphone’s cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.

• Excels in venues with controlled stage volume or in-ear monitoring
  
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  
• Superior anti-shock engineering for low handling noise
  
• Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity
  
• Condenser design for studio-quality performance
  
• Integral 80 Hz HPF switch and 10 dB pad
  
• Corrosion-resistant contacts from gold-plated XLRM-type connector
  
• Rugged, all-metal design and construction for years of trouble-free use
  

SPECIFICATIONS
ELEMENT	Fixed-charge back plate permanently polarized condenser
POLAR PATTERN	Cardioid
FREQUENCY RESPONSE	40-20,000 Hz
LOW FREQUENCY ROLL-OFF	80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY	–40 dB (10.0 mV) re 1V at 1 Pa
IMPEDANCE	200 ohms
MAXIMUM INPUT SOUND LEVEL	148 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical)	127 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO	73 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS	11-52V DC, 3.5 mA typical
SWITCHES	Flat, roll-off; 10 dB pad
WEIGHT	274 g (9.7 oz)
DIMENSIONS	179.0 mm (7.05") long, 50.0 mm (1.97") diameter
OUTPUT CONNECTOR	Integral 3-pin XLRM-type
ACCESSORIES FURNISHED	AT8470 Quiet-Flex™ stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
AUDIO-TECHNICA CASE STYLE	T6

SPECIFICATION GRAPHS
Click on the chart to view the larger image
		POLAR PATTERN
		FREQUENCY RESPONSE

Recommended Accessories:

SOUND PROFESSIONALS PORTABLE MONO 48 VOLT PHANTOM POWER SUPPLY  $29.00 More Info  Add to cart

SOUND PROFESSIONALS PROFESSIONAL STUDIO SCISSOR STYLE MICROPHONE BOOM ARM WITH TWO BASES (CLAMP AND SCREW MOUNT)  $59.00 More Info  Add to cart

SOUND PROFESSIONALS STUDIO POP FILTER/SCREEN WITH GOOSENECK AND CLAMP (ATTACHES TO STANDARD MIC STANDS, NOT RECOMMENDED FOR DESKTOP TRIPOD STANDS)  $19.00 More Info  Add to cart

SOUND PROFESSIONALS UNIVERSAL SHOCK MOUNT FOR MOST MICROPHONES  $25.00 More Info

SOUND PROFESSIONALS ADAPTER TO MOUNT MICROPHONE MOUNTS ONTO A CAMERA OR LIGHTING TRIPOD - SEE DETAILS. MADE IN USA.  $8.00 More Info  Add to cart

SOUND PROFESSIONALS CLAMP STYLE MICROPHONE MOUNT  $15.00 More Info  Add to cart

SOUND PROFESSIONALS DESKTOP MICROPHONE STAND WITH WEIGHTED BASE  $15.00 More Info  Add to cart

SOUND PROFESSIONALS FOUR MIC HOLDER - HOLDS FOUR MICROPHONES (MIC MOUNTS NOT INCLUDED) - 5/8" THREAD  $15.00 More Info  Add to cart

SOUND PROFESSIONALS ISOLATION HANDLE FOR HANDHELD MICROPHONES. MADE IN USA.  $15.00 More Info  Add to cart

SOUND PROFESSIONALS PORTABLE FOLDING TRIPOD LEG MIC STAND - STAND ADJUSTS FROM 35 TO 63 INCHES. TELESCOPING BOOM ADJUSTS - 20 TO 36 INCHES - FREE SHIPPING NOT APPLICABLE  $39.00 More Info  Add to cart

SOUND PROFESSIONALS TWO MIC HOLDER- HOLDS TWO MICROPHONES (MIC MOUNTS NOT INCLUDED) - 5/8" THREAD  $7.99 More Info  Add to cart

TOUR GRADE DESKTOP MICROPHONE STAND WITH WEIGHTED BASE - EXTENDS FROM 9 TO 15 INCHES (TGMC60)  $20.00 More Info  Add to cart

TOUR GRADE PORTABLE MINI FOLDING TRIPOD LEG MIC STAND - STAND ADJUSTS UP TO 25 INCHES WITH SHORT BOOM ARM  $29.00 More Info  Add to cart

TOUR GRADE TGMC68 - PORTABLE FOLDING TRIPOD LEG MIC STAND - STAND ADJUSTS FROM 35 TO 63 INCHES. TELESCOPING BOOM ARM ADJUSTS FROM 20 TO 36 INCHES  $39.00 More Info  Add to cart

MARSHALL ELECTRONICS MIC MATE - MICROPHONE PREAMP AND A/D CONVERTER WITH PHANTOM POWER  $69.00 More Info  Add to cart