Reward points:
Purchasing this will earn you 46200 rewards points! See the Policies page for details.

Description:

Manufacturer's website

Featuring breakthrough audio and mechanical design innovations, the phantom-powered U851R offers outstanding speech intelligibility and transparent sound quality for surface-mount applications. The microphone is equipped with a PivotPoint™ rotating output connector, UniSteep® filter and UniGuard™ RFI-shielding technology. It accepts interchangeable condenser elements—available for boundary microphones in cardioid, hypercardioid and omnidirectional polar patterns. With a heavy die-cast case and silicon foam bottom pads to minimize coupling of surface vibration to the microphone, the U851R is equipped with self-contained electronics, eliminating the need for an external power module.

• Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
  
• PivotPoint™ rotating output connector allows cable to exit from either the rear or the bottom of the microphone
  
• Superior off-axis rejection for maximum gain before feedback
  
• UniGuard™ RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  
• Self-contained electronics eliminate need for external power module
  
• Small-diameter UniPoint capsule near boundary eliminates phase distortion and delivers clear, high-output performance
  
• Heavy die-cast case and non-slip silicon foam bottom pads minimize coupling of surface vibration to the microphone
  
• Low-profile design with low-reflectance finish for minimum visibility
  
• Available in two colors: black (U851R) and white (U851RW)
  

SPECIFICATIONS
ELEMENT	Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN	Half-cardioid (cardioid in hemisphere above mounting surface)
FREQUENCY RESPONSE	30-20,000 Hz
LOW FREQUENCY ROLL-OFF	80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITY	–34 dB (19.9 mV) re 1V at 1 Pa
IMPEDANCE	200 ohms
MAXIMUM INPUT SOUND LEVEL	134 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical)	108 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO	68 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS	11-52V DC, 4 mA typical
SWITCH	Flat, roll-off
WEIGHT	9.2 oz (262 g)
DIMENSIONS	4.25" (108.0 mm) long, 3.31" (84.0 mm) maximum width, 0.91" (23.0 mm) height
OUTPUT CONNECTOR	TB3M-type
CABLE	25.0' (7.6 m) long, 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F and XLRM-type connectors
OPTIONAL INTERCHANGEABLE ELEMENTS	UE-H hypercardioid (100°); UE-O omnidirectional (360°)
ACCESSORY FURNISHED	Soft protective pouch

SPECIFICATION GRAPHS
Click on the chart to view the larger image
		POLAR PATTERN
		FREQUENCY RESPONSE