Reward points:
Purchasing this will earn you 56100 rewards points! See the Policies page for details.

Description:

Manufacturer's website

Designed to deliver easy, flexible control in conference and boardroom installations, the versatile U891R cardioid condenser boundary microphone features a touch-sensitive on-off switch that can be set to three modes: press-on/press-off, press to talk, and press to mute. The phantom-powered microphone is equipped with a unique PivotPoint™ rotating output connector and an LED status indicator. UniGuard™ innovations offer unsurpassed immunity from radio frequency interference; interchangeable elements are available in cardioid, hypercardioid and omnidirectional polar patterns; an 80 Hz low-cut UniSteep® filter reduces pickup of low-frequency ambient noise. The microphone’s heavy die-cast case and silicon foam bottom pads minimize coupling of surface vibration to the microphone. The unit’s self-contained electronics eliminate the need for an external power module.

• Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
  
• Ultra-quiet electronic switch can be set to any of three operating modes: “touch-on/ touch-off,” “touch-to-talk” and “touch-to-mute”
  
• PivotPoint™ rotating output connector allows cable to exit from either the rear or the bottom of the microphone
  
• Superior off-axis rejection for maximum gain before feedback
  
• UniGuard™ RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  
• Small-diameter UniPoint capsule near boundary eliminates phase distortion and delivers clear, high-output performance
  
• Heavy die-cast case and non-slip silicon foam bottom pads minimize coupling of surface vibration to the microphone
  
• Low-profile design with low-reflectance finish for minimum visibility
  
• Available in two colors: black (U891R) and white (U891RW)
  

SPECIFICATIONS
ELEMENT	Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN	Half-cardioid (cardioid in hemisphere above mounting surface)
FREQUENCY RESPONSE	30-20,000 Hz
LOW FREQUENCY ROLL-OFF	80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITY	–34 dB (19.9 mV) re 1V at 1 Pa
IMPEDANCE	200 ohms
MAXIMUM INPUT SOUND LEVEL	130 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical)	104 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO	68 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS	11-52V DC, 4 mA typical
SWITCHES	Touch-sensitive control: on/off; Switch function: touch on/off, momentary on, momentary off; Flat, roll-off
WEIGHT	9.3 oz (264 g)
DIMENSIONS	4.25" (108.0 mm) long, 3.31" (84.0 mm) maximum width, 0.91" (23.0 mm) height
OUTPUT CONNECTOR	TB3M-type
CABLE	25.0' (7.6 m) long, 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F and XLRM-type connectors
OPTIONAL INTERCHANGEABLE ELEMENTS	UE-H hypercardioid (100°); UE-O omnidirectional (360°)
ACCESSORY FURNISHED	Soft protective pouch

SPECIFICATION GRAPHS
Click on the chart to view the larger image
		POLAR PATTERN
		FREQUENCY RESPONSE