Reward points:
Purchasing this will earn you 29400 rewards points! See the Policies page for details.

Description:

Manufacturer's website

The new AT2010 is designed to bring the studio-quality articulation and intelligibility of Audio-Technica’s renowned 20 Series to the stage, for crystal-clear vocal performances. Featuring the same 16 mm low-mass diaphragm found in the critically acclaimed AT2020 side-address studio condenser, the AT2010 excels wherever articulate vocals are needed: in houses of worship, for solo performances, jazz vocalists, singer/songwriters, and more.

• Extended frequency response and superior transient response for smooth, natural sonic characteristics
• High SPL-handling and wide dynamic range provide unmatched versatility
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
• Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity
• Corrosion-resistant contacts from gold-plated XLRM-type connector
• Rugged, all-metal and construction for years of trouble-free service
• Quiet-Flex™ stand clamp provides silent, flexible microphone positioning

SPECIFICATIONS
ELEMENT	Fixed-charge back plate permanently polarized condenser
POLAR PATTERN	Cardioid
FREQUENCY RESPONSE	40-20,000 Hz
OPEN CIRCUIT SENSITIVITY	–48 dB (3.9 mV) re 1V at 1 Pa
IMPEDANCE	100 ohms
MAXIMUM INPUT SOUND LEVEL	136 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical)	113 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO	71 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS	48V DC, 2 mA typical
WEIGHT	233 g (8.2 oz)
DIMENSIONS	179.1 mm (7.05") long, 50.8 mm (2.00") maximum body diameter
OUTPUT CONNECTOR	Integral 3-pin XLRM-type
ACCESSORIES FURNISHED	AT8470 Quiet-Flex stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch

SPECIFICATION GRAPHS
Click on the chart to view the larger image
		AT2010 POLAR PATTERN
		AT2010 FREQUENCY RESPONSE

Recommended Accessories:

SOUND PROFESSIONALS PROFESSIONAL STUDIO SCISSOR STYLE MICROPHONE BOOM ARM WITH TWO BASES (CLAMP AND SCREW MOUNT) - 5/8" STANDARD THREAD MOUNT  $99.00 More Info  Add to cart

SOUND PROFESSIONALS STUDIO POP FILTER/SCREEN WITH GOOSENECK AND CLAMP (ATTACHES TO STANDARD MIC STANDS, NOT RECOMMENDED FOR MINI DESKTOP TRIPOD STANDS)  $19.00 More Info  Add to cart

SOUND PROFESSIONALS UNIVERSAL SHOCK MOUNT FOR MOST MICROPHONES  $25.00 More Info

SOUND PROFESSIONALS ADAPTER TO MOUNT MICROPHONE MOUNTS ONTO A CAMERA OR LIGHTING TRIPOD - SEE DETAILS. MADE IN USA.  $8.00 More Info  Add to cart

SOUND PROFESSIONALS CLAMP STYLE MICROPHONE MOUNT  $15.00 More Info  Add to cart

SOUND PROFESSIONALS DESKTOP MICROPHONE STAND WITH WEIGHTED BASE  $15.00 More Info  Add to cart

SOUND PROFESSIONALS FOUR MIC HOLDER - HOLDS FOUR MICROPHONES (MIC MOUNTS NOT INCLUDED) - 5/8" THREAD  $15.00 More Info  Add to cart

SOUND PROFESSIONALS ISOLATION HANDLE FOR HANDHELD MICROPHONES. MADE IN USA.  $15.00 More Info  Add to cart

SOUND PROFESSIONALS PORTABLE FOLDING TRIPOD LEG MIC STAND - STAND ADJUSTS FROM 35 TO 63 INCHES. TELESCOPING BOOM ADJUSTS - 20 TO 36 INCHES - FREE SHIPPING NOT APPLICABLE  $39.00 More Info  Add to cart

SOUND PROFESSIONALS TWO MIC HOLDER- HOLDS TWO MICROPHONES (MIC MOUNTS NOT INCLUDED) - 5/8" THREAD  $7.99 More Info  Add to cart

TOUR GRADE DESKTOP MICROPHONE STAND WITH WEIGHTED BASE - EXTENDS FROM 9 TO 15 INCHES (TGMC60)  $20.00 More Info  Add to cart

TOUR GRADE TGMC68 - PORTABLE FOLDING TRIPOD LEG MIC STAND - STAND ADJUSTS FROM 35 TO 63 INCHES. TELESCOPING BOOM ARM ADJUSTS FROM 20 TO 36 INCHES  $39.00 More Info  Add to cart

MARSHALL ELECTRONICS MIC MATE - MICROPHONE PREAMP AND A/D CONVERTER WITH PHANTOM POWER  $78.00 More Info  Add to cart