Reward points:
Purchasing this will earn you 77100 rewards points! See the Policies page for details.

Description:

Manufacturer's website

Designed for video production and broadcast (ENG/EFP) audio acquisition, the AT8015 provides the narrow acceptance angle desirable for long-distance sound pickup, along with excellent sound rejection from the sides and rear of mic. The roll-off position reduces the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation and mechanically coupled vibrations.

• Designed for video production and broadcast (ENG/EFP) audio acquisition
  
• Provides the narrow acceptance angle desirable for long-distance sound pickup
  
• Excellent sound rejection from the sides and rear of mic
  
• Switchable low-frequency roll-off
  
• Operates on battery or phantom power
  
• RoHS compliant—free from all substances specified in the EU directive on hazardous substances

SPECIFICATIONS
ELEMENT	Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN	Line + gradient
FREQUENCY RESPONSE	40-20,000 Hz
LOW FREQUENCY ROLL-OFF	80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY	Phantom: –38 dB (12.5 mV) re 1V at 1 Pa Battery: –39 dB (11.2 mV) re 1V at 1 Pa
IMPEDANCE	Phantom: 250 ohms Battery: 300 ohms
MAXIMUM INPUT SOUND LEVEL	Phantom: 132 dB SPL, 1 kHz at 1% T.H.D. Battery: 120 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical)	Phantom: 110 dB, 1 kHz at Max SPL Battery: 98 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO	72 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS	11-52V DC, 2 mA typical
BATTERY TYPE	1.5V AA/UM3
BATTERY CURRENT / LIFE	0.4 mA / 1200 hours typical (alkaline)
SWITCH	Flat, roll-off
WEIGHT	195 g (6.9 oz)
DIMENSIONS	460.0 mm (18.11") long, 21.0 mm (0.83") diameter
OUTPUT CONNECTOR	Integral 3-pin XLRM-type
ACCESSORIES FURNISHED	AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8135 windscreen; battery; protective carrying case
AUDIO-TECHNICA CASE STYLE	SG3

SPECIFICATION GRAPHS
Click on the chart to view the larger image
		POLAR PATTERN
		FREQUENCY RESPONSE

---

Conditions

Additional useful accessories:

Sound Professionals Professional Studio Scissor Style Microphone Boom Arm with Two Bases (Clamp and Screw Mount) - 5/8 inch Standard Mount  $59.00 More Info

Sound Professionals Studio Pop Filter/Screen with Gooseneck and Clamp (Attaches to Standard Mic Stands - See details   $19.00 More Info  Add to cart

Sound Professionals Universal Shock Mount For Most Microphones Up to 54.1mm Diameter (See Details) - SP-SHM-5  $39.00 More Info  Add to cart

Sound Professionals Adapter to Mount Microphone Mounts Onto A Camera Or Lighting Tripod - See Details. Made in USA.   $7.99 More Info  Add to cart

Sound Professionals Clamp Style Microphone Mount (Wt-Msa-1)   $10.50 More Info  Add to cart

Sound Professionals Desktop Microphone Stand with Weighted Base - Extends From 9 to 15 inches  $25.00 More Info  Add to cart

Sound Professionals Isolation Handle For Handheld Microphones. Made in USA.   $10.00 More Info  Add to cart

Sound Professionals T Bar - Four Mic Holder - Holds Four Microphones (Mic Mounts Not Included) - 5/8 inch Thread   $15.00 More Info  Add to cart

Sound Professionals Two Mic Holder- Holds Two Microphones (Mic Mounts Not Included) - 5/8 inch Thread - 7.5 inches Wide   $15.00 More Info  Add to cart

Ultimate Portable Folding Tripod Leg Mic Stand - Height 39 inches - 69 inches. Telescoping Boom Adjusts - 21 to 36 inches   $29.00 More Info