Reward points:
Purchasing this will earn you 55500 rewards points! See the Policies page for details.

Description:

Manufacturer's website

Audio-Technica’s omnidirectional AT899 is engineered for intelligible, accurate voice reproduction. Its low-profile design (a mere 5 mm in diameter) assures minimum visibility. The mic may be worn as a lavalier and is easily hidden in clothing or hair. It offers the convenience of battery or phantom power; its switchable low-frequency roll-off reduces popping.

• Maximum intelligibility and clean, accurate reproduction for vocalists, lecturers, stage and television talent, and houses of worship
  
• Low-profile design (a mere 5 mm in diameter) is ideal for applications requiring minimum visibility
  
• Operates on battery or phantom power
  
• All wireless models available in either low-reflectance black or beige
  
• Extensive array of provided accessories includes a clothing clip, viper clip, magnet clip and lanyard (black models only), windscreens, element covers, interchangeable single and double mic holders
  
• Accessories available separately include complete accessory kits, clothing clips, three-pack element covers and three-pack windscreens
  
• 9.8' (3.0 m) cable permanently attached to mic, TA3F connector at power module
  
• Also available as:
  AT899c – less power module; 55" (1.4 m) cable, unterminated
  AT899c-TH – same as AT899c but in "theater" color (beige)
  AT899cL4 – less power module; 55" (1.4 m) cable terminated with Lemo connector for Sennheiser SK wireless systems
  AT899cL4-TH – same as AT899cL4 but in "theater" color (beige)
  AT899cT4 – less power module; 55" (1.4 m) cable terminated with TA4F connector for Shure wireless systems
  AT899cT5 – less power module; 55" (1.4 m) cable terminated with TA5F connector for ATW-U101 body-pack wireless system
  AT899cT5-TH – same as AT899cT5 but in "theater" color (beige)
  AT899cW – less power module; 55" (1.4 m) cable terminated with locking 4-pin connector for A-T UniPak™ wireless systems
  AT899cW-TH – same as AT899cW but in "theater" color (beige)
  

SPECIFICATIONS
ELEMENT	Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN	Omnidirectional
FREQUENCY RESPONSE	20-20,000 Hz
LOW FREQUENCY ROLL-OFF	80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY	Phantom: -43 dB (7.0 mV) re 1V at 1 Pa Battery: -46 dB (5.0 mV) re 1V at 1 Pa
IMPEDANCE	Phantom: 200 ohms Battery: 250 ohms
MAXIMUM INPUT SOUND LEVEL	Phantom: 138 dB SPL, 1 kHz at 1% T.H.D. Battery: 116 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical)	Phantom: 108 dB, 1 kHz at Max SPL Battery: 86 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO	64 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS	11-52V DC, 2 mA typical
BATTERY TYPE	1.5V AA/UM3
BATTERY CURRENT / LIFE	0.4 mA / 1200 hours typical (alkaline)
SWITCH	Flat, roll-off (recessed)
WEIGHT (MICROPHONE)	0.02 oz (0.5 g)
WEIGHT (POWER MODULE)	3.6 oz (102 g)
DIMENSIONS (MICROPHONE)	0.63" (16.0 mm) long, 0.20" (5.0 mm) diameter
DIMENSIONS (POWER MODULE)	5.71" (145.0 mm) long, 0.83" (21.0 mm) diameter
OUTPUT CONNECTOR (POWER MODULE)	Integral 3-pin XLRM-type
CABLE	9.8' (3.0 m) long (permanently attached to microphone), 0.08" (2.0 mm) diameter, 2-conductor, shielded cable with TA3F output connector that mates with TB3M jack on power module
ACCESSORIES FURNISHED	AT8537 power module; AT8439 cable clip; clothing clip base; viper clip base; magnet clip base and plate with lanyard; three single mic holders; two double mic holders; two element covers; two windscreens; battery; protective carrying case
AUDIO-TECHNICA CASE STYLE	M29

SPECIFICATION GRAPHS
Click on the chart to view the larger image
		POLAR PATTERN
		FREQUENCY RESPONSE