Reward points:
Purchasing this will earn you 83700 rewards points! See the Policies page for details.

Description:

ATM350, ATM-350, ATM 350

Manufacturer's website

Supplied with Audio-Technica's versatile UniMount clip and new violin mount, the low-profile ATM350 is an exceptional cardioid condenser microphone designed to clip to brass, reeds, piano, snare, toms, and violin. The microphone offers a crisp, clear, well-balanced response, even at high SPLs. It features an integral 80 Hz hi-pass filter and is also equipped with a new in-line power module. Its cardioid polar pattern reduces pickup of sounds from the side and rear for effective protection against feedback.

- Low-profile design for minimum visibility
- UniMount clip permits accurate positioning, provides shock resistance and protects element
- Unique violin mount permits unobtrusive placement of microphone between the instrument's bridge and tailpiece
- Crisp, clear, well-balanced response, even at high SPLs
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Interchangeable elements available for hypercardioid and omnidirectional polar patterns
- Corrosion-resistant contacts from gold-plated XLRM-type connector
- Rugged, all-metal design and construction for years of trouble-free use

SPECIFICATIONS
ELEMENT	Fixed-charge back plate permanently polarized condenser
POLAR PATTERN	Cardioid
FREQUENCY RESPONSE	40-20,000 Hz
LOW FREQUENCY ROLL-OFF	80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY	–49 dB (3.5 mV) re 1V at 1 Pa
IMPEDANCE	50 ohms
MAXIMUM INPUT SOUND LEVEL	149 dB SPL, 1 kHz at 1 percentT.H.D.
DYNAMIC RANGE (typical)	122 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO	67 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS	11-52V DC, 3.5 mA typical
SWITCH	Flat, roll-off
WEIGHT (MICROPHONE)	14.5 g (0.5 oz)
WEIGHT (POWER MODULE)	81.2 g (2.9 oz)
DIMENSIONS (MICROPHONE)	37.8 mm (1.49 inches) long, 12.2 mm (0.48 inch) diameter
DIMENSIONS (POWER MODULE)	92.9 mm (3.66 inches) long, 18.9 mm (0.74 inch) diameter
OUTPUT CONNECTOR (POWER MODULE)	Integral 3-pin XLRM-type
CABLE	4.0 m (13.1 ft) long (permanently attached to microphone), 3.2 mm (0.13 inch) diameter, 2-conductor shielded cable with TA3F-type connector
ACCESSORIES FURNISHED	AT8542 power module; AT8418 UniMount microphone instrument mount; AT8468 violin mount; soft protective pouch
AUDIO-TECHNICA CASE STYLE	M36

SPECIFICATION GRAPHS
Click on the chart to view the larger image
		POLAR PATTERN
		FREQUENCY RESPONSE