Site Map | Shopping Cart: Items 0 Subtotal $ 0.00 [ edit | buy now ]
Special - FREE shipping on most orders $24.99 and up!!
1-800-213-3021
1-609-267-4400

 
Select category below
 
Sign-up for our newsletter
Special of the day!

Gift Finder!





Top Sellers Top Reviewed Message Center
Home > WIRELESS MICROPHONES > WIRELESS HANDHELD MICROPHONES > ATW-252

Click Here
for full size image

Part# - ATW-252 - Audio Technica - 200 series Freeway VHF Wireless System
Retail: $174.95   Your Price (USD): $99.00  You Save: 43.41%  

To continue, select option here:



Reward points:
Purchasing this will earn you 29700 rewards points! See the Policies page for details.

Description:

Manufacturer's website

Audio-Technica’s Freeway 200 Series Wireless Systems are designed to provide reliable performance, easy setup and clear, natural sound quality. Available in handheld, headworn, guitar, lavalier and body-pack configurations, the 200 Series Freeway Wireless Systems are single-channel, fixed-frequency systems available in three VHF frequencies (169.505, 170.245, and 171.905 MHz).

Each 200 Series Freeway Wireless System includes the ATW-R250 receiver and either a body-pack transmitter or handheld microphone/ transmitter. The ATW-R250 is a non-diversity, single-channel receiver with advanced dipole antenna design for extended operating range, which improves operation by providing a ground element in addition to the usual signal element. The ATW-R250 also offers volume control along with AF Peak, RF and Power indicator lights.


  • Easy operation and clear, natural sound quality
  • Reliable performance and durable construction
  • Advanced dipole antenna system for extended operating range
  • Power, RF, and AF Peak indicators
  • Volume control, 1/4 inch output jack and space-saving power supply
  • Rugged unidirectional dynamic element on handheld microphone/transmitter
  • Variable microphone trim control and easily accessible On/Standby/Off switch on transmitters
  • Professional locking connector on UniPak body-pack transmitter
  • Available in 7 system configurations


 SYSTEM CONFIGURATIONS

UniPak® Transmitter System
ATW-251
ATW-R250 receiver and ATW-T201 transmitter.
Select a Wireless Essentials® microphone or cable to complete the system.

UniPak® Guitar System
ATW-251/G
ATW-R250 receiver, ATW-T201 transmitter and Hi-Z instrument input cable.

UniPak® Headworn Microphone System
ATW-251/H
ATW-R250 receiver, ATW-T201 transmitter and PRO 8HEcW headworn microphone.
 

UniPak® Lavalier Microphone System
ATW-251/L
ATW-R250 receiver, ATW-T201 transmitter and omnidirectional lavalier microphone.
 

Handheld Microphone System
ATW-252
ATW-R250 receiver and ATW-T202 handheld microphone/transmitter.
 

UniPak® Headworn Microphone System
ATW-251/H92
ATW-R250 receiver, ATW-T201 transmitter and PRO 92cW omnidirectional condenser headworn microphone (black).
 

UniPak® Headworn Microphone System
ATW-251/H92-TH
ATW-R250 receiver, ATW-T201 transmitter and PRO 92cW omnidirectional condenser headworn microphone (beige).
 

 OVERALL SYSTEM SPECIFICATIONS

 
Operating Frequency VHF high band, 169 MHz to 172 MHz

Number of Channels Fixed channel

Frequency Stability +/- 0.005 percent

Modulation Mode FM

Maximum Deviation +/- 15 kHz

Operating Range 200 feet typical

Operating Temperature Range 40 degrees F (4 degrees C) to 110 degrees F (43 degrees C)

Frequency Response 80 Hz to 13 kHz

 RECEIVER SPECIFICATIONS

 
Receiving System Non-diversity, single-channel, dual antenna system

Image Rejection 50 dB minimum

Signal-to-noise Ratio 80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz

Total Harmonic Distortion less than or equal to 1 percent (10 kHz deviation at 1 kHz)

Sensitivity 20 dB microV for 60 dB S/N (IEC-weighted)

Audio Output 350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load)

Output Connector 1/4 inch TS (mono) phone jack

Power Supply 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply

Dimensions 7.48 inches (190.0 mm) W x
1.65 inches (42.0 mm) H x
5.12 inches  (130.0 mm) D

Net Weight 11.0 oz (311 g)

Accessory Included Power supply

 BODY-PACK TRANSMITTER SPECIFICATIONS

 
RF Power Output 10 mW High position, 2 mW Low position, typical

Spurious Emissions Under federal regulations

Dynamic Range Greater than or equal to 90 dB, A-weighted

Input Connections High impedance, low impedance, bias

Battery 9V (NEDA type 1604) alkaline, not included

Current Consumption 30 mA typical

Battery Life Approximately 15 hours in High position;
Approximately 20 hours in Low position
(depending on battery type and use pattern)

Dimensions 2.56 inches (65.0 mm) W x
4.33 inches (110.0 mm) H x
1.00 inches (25.4 mm) D

Net Weight 2.8 oz (78 g) (without battery)

 HANDHELD TRANSMITTER SPECIFICATIONS

 
RF Power Output 10 mW High position, 2 mW Low position, typical

Spurious Emissions Under federal regulations

Dynamic Range Greater than or equal to 90 dB, A-weighted

Microphone Element Dynamic unidirectional

Battery 9V (NEDA type 1604) alkaline, not included

Current Consumption 30 mA typical

Battery Life Approximately 15 hours in High position;
Approximately 20 hours in Low position
(depending on battery type and use pattern)

Dimensions 9.50 inches (241.3 mm) long,
2.10 inches (53.3 mm) maximum diameter

Net Weight 12.7 oz (360 g) (without battery)

Accessory Included AT8456a Quiet-Flex stand clamp




Specifications:

Please see overview for specifications

Customer Reviews:
Write an online review and share your thoughts with other viewers!

The Sound Professionals™, Inc.
3444 Sylon Blvd.
Hainesport, NJ 08036 USA
[Powered by Make-a-Store.com]
Ecommerce Shopping Cart Software by Make-a-Store.com