Reward points:
Purchasing this will earn you 54915 rewards points! See the Policies page for details.

Description:

MANUFACTURER'S WEBSITE

- Serious advances in affordable professional wireless
- Clear sound quality and rock-solid, dependable performance
- Automatic frequency scanning finds an open channel at the touch of a button
- All 10 user-switchable channels are compatible—for easy use with multiple systems; no confusing frequency groups
- True Diversity operation selects the better signal from the two receiver sections, reducing dropouts
- Tone Lock tone squelch system fights interference
- Rugged metal half-rack receiver with soft-touch controls and LCD display featuring RF and AF metering
- Balanced XLR and unbalanced 1/4 in output jacks enable use with a wide variety of audio gear
- Includes rack-mount kit and detachable UHF antennas
- Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver
- ATW-T220 Handheld Microphone/Transmitter features PRO 41 Capsule for maximum feedback rejection and consistent sound

SYSTEM CONFIGURATIONS

	ATW-2110 ATW-R2100 receiver and ATW-T210 UniPak transmitter. Select a Wireless Essentials microphone or cable to complete the system.	MSRP US$429.00
	ATW-2120 ATW-R2100 receiver and ATW-T220 handheld cardioid dynamic microphone/transmitter.	MSRP US$499.00

OVERALL SYSTEM SPECIFICATIONS
Operating Frequency	656.125 to 678.500 MHz
Number of Channels	10 total
Frequency Stability	±0.005 percent, Phase Lock Loop frequency control
Modulation Mode	FM
Normal Deviation	±5 kHz
Operating Range	300' typical
Operating Temperature Range	41 degrees F (5 degrees C) to 113 degrees F (45 degrees C)
Frequency Response	100 Hz to 15 kHz

RECEIVER SPECIFICATIONS
Receiving System	Dual independent RF sections, automatic-switching diversity
Image Rejection	55 dB nominal, 50 dB minimum
Signal-to-noise Ratio	>100 dB at 40 kHz deviation (A-weighted), maximum modulation 40 kHz
Total Harmonic Distortion	<1 percent (10 kHz deviation at 1 kHz)
Sensitivity	20 dBµV (S/N 60 dB at 5 kHz deviation, IEC-weighted)
Intermediate Frequency	65.75 MHz, 10.7 MHz
Audio Output	Unbalanced: 25 mV (at 1 kHz, ±5 kHz deviation, 100k ohm load) Balanced: 12.5 mV (at 1 kHz, ±5 kHz deviation, 100k ohm load)
Output Connectors	Unbalanced: 1/4 in (6.3 mm) phone jack Balanced: XLRM-type
Power Supply	120V AC 60 Hz, or 12-18V DC, 350 mA, with external supply
Dimensions	8.27 in (210.0 mm) W x 1.73 in (44.0 mm) H x 6.39 in (162.2 mm) D
Weight	2.2 lbs (1.0 kgs)
Accessories Included	Two flexible UHF antennas, rack-mount adapters, AC adapter

BODY-PACK TRANSMITTER SPECIFICATIONS
RF Power Output	12 mW
Spurious Emissions	Under federal regulations
Input Connections	High impedance, low impedance, bias
Batteries	Two 1.5V AA alkaline (not included)
Current Consumption	150 mA typical
Battery Life	Approximately 9 hours (depending on battery type and use pattern)
Dimensions	2.60 in (66.0 mm) W x 3.63 in (92.3 mm) H x 0.89 in (22.5 mm) D
Net Weight	2.82 oz (80 g)

HANDHELD TRANSMITTER SPECIFICATIONS
RF Power Output	12 mW
Spurious Emissions	Under federal regulations
Microphone Element	Dynamic, unidirectional
Batteries	Two 1.5V AA alkaline (not included)
Current Consumption	150 mA typical
Battery Life	Approximately 9 hours (depending on battery type and use pattern)
Dimensions	9.02 in (229.0 mm) long x 2.11 in (53.5 mm) maximum diameter
Net Weight	7.81 oz (221.5 g)