Reward points:
Purchasing this will earn you 149700 rewards points! See the Policies page for details.

Description:

Manufacturer's website

Designed for broadcast and professional recording, Audio-Technica's BP4025 stereo condenser offers large-diaphragm capsules in an innovative coincident capsule configuration. This allows for a smaller housing while producing an X/Y stereo image with the spatial impact and realism of a live sound field. Ideal for use with professional audio and video equipment, the microphone is fully RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).

- Large-diaphragm capsules offer pristine sound quality and exceptionally low noise
- Innovative coincident capsule configuration produces accurate stereo image in smaller housing
- Compact, lightweight design is ideal for camera-mount use
- Excellent channel separation
- Phantom power operation—for use with professional equipment
- Switchable low-frequency roll-off and 10 dB pad
- Includes one balanced cable (two 3-pin XLRM-type connectors at output)
- RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)

SPECIFICATIONS
ELEMENT	Fixed-charge back plate permanently polarized condenser
POLAR PATTERN	X/Y Stereo
FREQUENCY RESPONSE	20-17,000 Hz
LOW FREQUENCY ROLL-OFF	80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY	-32 dB (25.1 mV) re 1V at 1 Pa
CHANNEL BALANCE	less than 2.5 dB
IMPEDANCE	170 ohms
MAXIMUM INPUT SOUND LEVEL	145 dB SPL, 1 kHz at 1 percent T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
DYNAMIC RANGE (typical)	131 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO	80 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS	11-52V DC, 7 mA typical (both channels total)
SWITCH	Flat, roll-off; 10 dB pad (nominal)
WEIGHT	269 g (9.5 oz)
DIMENSIONS	186.0 mm (7.32 in) long, 47.6 mm (1.87 in) head diameter 21.0 mm (0.83 in) body diameter
OUTPUT CONNECTOR	Integral 5-pin XLRM-type
CABLE	5.0 m (16.5 ft) long, 8 conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output end
ACCESSORIES FURNISHED	AT8405a stand clamp for 5/8 in-27 threaded stands; windscreen; soft protective pouch
AUDIO-TECHNICA CASE STYLE	S12

SPECIFICATION GRAPHS
Click on the chart to view the larger image
	POLAR PATTERN
	FREQUENCY RESPONSE

Alternate part# AT825, SHURE VP88, AT4025,BP4025,BP 4025,BP-4025