Reward points:
Purchasing this will earn you 74700 rewards points! See the Policies page for details.

Description:

Manufacturer's website

With a capsule diameter not much bigger than the head of a pin, Audio-Technica’s smallest-ever lavalier microphone virtually disappears in props or clothing to create highest-quality audio for broadcast and theater sound reinforcement.

The BP896 MicroPoint omnidirectional lavalier delivers extremely intelligible natural audio and handles high sound pressure levels with ease. Its subminiature omni element is enclosed in a durable housing designed to minimize noise from handling, clothing and wind. Flip a switch to eliminate low-frequency hum without affecting intelligibility.

Offered in wired and wireless models, the BP896 comes generously equipped with an extensive accessory kit - mic holders, windscreens, element covers and more.

- Inconspicuous, lightweight capsule
- Extremely intelligible natural audio
- Handles high sound pressure levels with ease
- Rugged built for long-lasting performance
- High-pass UniSteep filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Requires 11V to 52V DC phantom power
- Includes generous accessory kit and protective case
- RoHS compliant—free from all substances specified in the EU directive on hazardous substances
- Available in black and beige, wired and wireless models:
BP896 – includes AT8539 power module
BP896-TH – same as BP896, but in theater color (beige)
BP896c – less power module; 1.4 m (55 inch) cable, unterminated
BP896c-TH – same as BP896c, but in theater color (beige)
BP896cW – less power module; 1.4 m (55 inch) cable terminated with locking 4-pin connector for A-T UniPak wireless systems
BP896cW-TH – same as BP896cW, but in theater color (beige)
BP896cL4 – less power module; 1.4 m (55 inch) cable terminated for Sennheiser wireless systems using Lemo connector
BP896cL4-TH – same as BP896cL4, but in theater color (beige)
BP896cLM3 – less power module; 1.4 m (55 inch) cable terminated for Sennheiser wireless systems using locking 3.5 mm connector
BP896cLM3-TH – same as BP896cLM3, but in theater color (beige)
BP896cT4 – less power module; 1.4 m (55 inch) cable terminated with TA4F-type connector for Shure wireless systems
BP896cT4-TH – same as BP896cT4, but in theater color (beige)
BP896cT5 – less power module; 1.4 m (55 inch) cable terminated with TA5F-type connector for Lectrosonics wireless systems
BP896cT5-TH – same as BP896cT5, but in theater color (beige)

SPECIFICATIONS
ELEMENT	Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN	Omnidirectional
FREQUENCY RESPONSE	20-20,000 Hz
LOW FREQUENCY ROLL-OFF	80 Hz, 18 dB/octave (wired only)
OPEN CIRCUIT SENSITIVITY	–49 dB (3.5 mV) re 1V at 1 Pa
IMPEDANCE	250 ohms (wired only)
MAXIMUM INPUT SOUND LEVEL	135 dB SPL, 1 kHz at 3 percent T.H.D.
DYNAMIC RANGE (typical)	104 dB, 1 kHz at Max SPL (wired only)
SIGNAL-TO-NOISE RATIO	63 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS	11-52V DC, 2 mA typical (wired only)
SWITCH	Flat, roll-off (wired only)
CURRENT CONSUMPTION	0.1 mA typical at 5V (wireless only)
VOLTAGE RANGE	2.5-11V (wireless only)
WEIGHT (MICROPHONE)	0.14 g (0.005 oz)
WEIGHT (POWER MODULE)	85 g (3.0 oz) (wired only)
DIMENSIONS (MICROPHONE)	10.8 mm (0.43 inch) long, 2.6 mm (0.10 inch) diameter
DIMENSIONS (POWER MODULE)	97.6 mm (3.84 inch) long, 18.9 mm (0.74 inch) diameter (wired only)
OUTPUT CONNECTOR (POWER MODULE)	Integral 3-pin XLRM-type
CABLE	1.4 m (55 inch) long (permanently attached to microphone), 1.6 mm (0.06 inch) diameter, 2-conductor shielded cable with locking 4-pin connector (wired only)
ACCESSORIES FURNISHED	BP896: AT8539 power module (wired only); two AT8157 windscreens; six element covers (2 white, 2 beige, 2 black); viper clip base; clothing clip base; 3 black single mic holders; 2 black double mic holders; belt clip (wired only); carrying case BP896-TH: AT8539 power module (wired only); two AT8157-TH windscreens; six element covers (2 white, 2 beige, 2 black); viper clip base; clothing clip base; 3 beige single mic holders; 2 beige double mic holders; belt clip (wired only); carrying case
AUDIO-TECHNICA CASE STYLE	M39

SPECIFICATION GRAPHS
Click on the chart to view the larger image
	POLAR PATTERN
	FREQUENCY RESPONSE