This versatile microphone provides the realistic spatial impact of a live sound field for many applications including stereo recording, ENG theater use, and camcorder recordings.

Included accessories

CM-4S condenser stereo microphone

• 2’ coiled stereo cable w/3.5 mm TRS plug

• 10’ Y-splitter cable to left & right 1/4" TS plugs

• Camera shoemount

• Mic clip

• User guide

• Warranty card

Features

The CM-4S uses closely-matched, wide range, condenser uni-directional (cardioid) elements, angled at 100° in an X/Y stereo configuration. It features excellent channel separation; smooth, linear 90Hz-16kHz frequency response with a switchable Stereo/Mono/Off switch, crisp, clear transparent audio; and internal battery operation. All this contained in a compact, lightweight design for easy camera mounting

The CM-4S has unbalanced, in-phase, low impedance stereo outputs. Use the 2’ stereo cable to connect to 3.5mm stereo inputs such as on camcorders or the 10’ cable to connect to two channels of your mixing console or recording equipment.

Placing the mic closer to the sound source will create a more pronounced stereo image while moving the mic further away will lessen the stereo image and result in more room noise. Placing a mic too close to a multi-voice source may result is some voices being more dominant than others.

Experiment with placement for the best possible results. Set the STEREO/MONO/OFF switch to mono when stereo application is not desired.

Before operating, install an alkaline AA battery by unscrewing, and sliding down, the lower portion of the handle to reveal the battery compartment. The CM-4S is only designed for battery use.