(5) GAIN CONTROLS — Adjust gain for Channel 1 and 2 respectively.

(6) PEAK LEDs — Channel 1 and 2 indicators light 5dB below clipping. Occasional fl ickering

on peaks is OK, but lower gain for that channel if lights continuously.

(7) XLR INPUTS — Connect to any microphone. Switch to phantom power only if requires

for either channel. Since this activates +48V to both channels, make sure other mic connected

will not be damaged by phantom power (eg. ribbon mics).

(8) LIMITER BUTTON — Push for added 15dB of limiting on both inputs simultaneously. For

best sound, use only sparingly as needed.

SPECIFICATIONS

Inputs ...........................................................................................Ch 1 & 2 XLR Balanced Inputs

Maximum Input ................................................................................................................. 250mV

Limiting ............................................................................................................... 15dB, selectable

Maximum Gain ......................................................................................................................50dB

THD ......................................................................................................................... 0.07% typical

Maximum Output Level ..........................................................................................................3.5V

Controls ..................................................................Power OFF/ON/ON w/+48V Phantom Power

3-way slide switch, Limiter OFF/ON push button switch,

Input Gain 1 & Gain 2 knob level controls

Connections .........................................Input 1 & 2 (female) and Output 1 & 2 (male) XLR jacks

Indicators .............................Power On LED, Peak 1 & Peak 2 LEDs (light 5dB before clipping)

Power ...................................................................................................Single 9V Alkaline battery

Current Drain:

Phantom Power Off ............................................................................................24mA no signal,

27mA max signal

Phantom Power On ............................................................................................27mA no signal,

40mA max signal

Case .............................................................................................................All metal construction

Dimensions (WxHxD) ........................................ 4.625” x 2.125” x 5.25” (117 x 54 x 133 mm)

Weight .......................................................................................................................1 lbs (454 g))

SERVICE

contact the Nady Customer Service Department via telephone: (510) 652-2411 or e-mail:

service@nady.com.

the dealer from whom you purchased this product. The warranty card supplied with this system

provides valuable warranty and service information. Store it in a safe place for future reference.

Do not attempt to service this unit yourself as it will void your warranty.