![]()
![]()
Introducing M2 & M3 Wireless In-Ear Monitor Systems ![]()
![]()
![]()
Audio-Technica is proud to introduce its new M2 and M3 Wireless In-Ear Monitor Systems. These feature-rich systems are designed to provide comfortable, crystal-clear sound on stage. Both systems are equipped with earphones offering a proprietary Audio-Technica dynamic driver with richly detailed high-fidelity sound. The clean, articulate mix allows performers to hear themselves at a comfortable volume. Instead of hearing a one-size-fits-all mix, performers have the benefit of Audio-Technica’s Personal Mix Control, offering independent control of volume and mix at the receiver. Delivering a wide array of professional features, the M2 & M3 Wireless In-Ear Monitor Systems are the new standard for in-ear audio in live performance.
|
| ||||||||||||||
M2 Components
EP3 Headphones
In-ear dynamic headphones offer high-fidelity sound and excellent isolation
M2T Stereo Transmitter
Wireless UHF transmitter (frequency-agile) offers 100 user-selectable frequencies
M2R Stereo Receiver
Personal Mix Control in a lightweight body-pack
Compare the M2 & M3 Wireless In-Ear Monitor Systems.
Why choose in-ear monitors?
OVERALL SYSTEM SPECIFICATIONS | |
| Operating Frequencies | Band E: 790.000 to 822.000 MHz, 100 frequencies Band F: 832.000 to 865.000 MHz, 100 frequencies Band L: 575.000 to 608.000 MHz, 100 frequencies Band M: 614.000 to 647.000 MHz, 100 frequencies Not all frequency bands available in all areas. Please check with local regulations. |
|
| |
| Minimum Frequency Step | 25 kHz |
|
| |
| Modulation Mode | FM stereo |
|
| |
| Maximum Deviation | ±40 kHz |
|
| |
| Dynamic Range | 90 dB (typical), A-weighted |
|
| |
| Total Harmonic Distortion | <1% at (1 kHz, ±20 kHz Deviation) |
|
| |
| Operating Range | 100 m (300'), typical Open range environment with no interfering signals. |
|
| |
| Operating Temperature Range | -5° C (23° F) to +50° C (122° F) Battery performance may be reduced at very low temperatures. |
|
| |
| Frequency Response | 60 Hz to 13 kHz (+/- 3 dB) |
|
| |
| Simultaneous Use | 10 channels per band (maximum recommended) For assistance with multi-band operation or other frequency coordination issues, please contact your local Audio-Technica customer service representative. |
RECEIVER SPECIFICATIONS | |
| Receiving System | Double conversion superheterodyne |
|
| |
| RF Sensitivity | 20 dBuV (at 60 dB S/N ratio, 50 ohms termination) |
|
| |
| Headphone Output Connector | 3.5 mm TRS stereo phone jack |
|
| |
| Headphone Output Power | 65 mW (at 32 ohms) |
|
| |
| Antenna Input | SMA-type, 50 ohms |
|
| |
| Aux Input Connector | 3.5 mm TRS stereo phone jack |
|
| |
| Batteries | 2 x 1.5V AA (not included) |
|
| |
| Battery Life | 8 hours (alkaline) Depending on battery type and use pattern |
|
| |
| Dimensions | 70.0 mm (2.76") W x 25.0 mm (0.98") D x 110.0 mm (4.33") H |
|
| |
| Net Weight | 110 g (3.9 oz), without batteries |
|
| |
| Accessories Included | EP3 earphone; frequency sticker; flexible antenna |
TRANSMITTER SPECIFICATIONS | |
| RF Power Output | 10 mW/30 mW (switchable), 50 ohms Limited to 10 mW within 863 MHz to 865 MHz Following national regulations |
|
| |
| Spurious Emissions | Following federal and national regulations |
|
| |
| Input Connections | XLRF-type/6.3 mm stereo (1/4") combination connector Pin 1 and Sleeve: Ground Pin 2 and Tip: Hot Pin 3 and Ring: Cold |
|
| |
| Maximum Input Level | XLRF-type/6.3 mm stereo, (1/4") balanced: +26 dBu 6.3 mm (1/4") mono, unbalanced: +26 dBu |
|
| |
| Loop Output Connector | XLRM-type connector Pin 1: Ground Pin 2: Hot Pin 3: Cold |
|
| |
| Power Requirement | 12-18V DC, 600 mA |
|
| |
| Antenna | Attached whip |
|
| |
| Dimensions | 210.0 mm (8.30") W x 132.0 mm (5.20") D x 44.0 mm (1.70") H |
|
| |
| Net Weight | 870 g (30.7 oz), without accessories |
|
| |
| Accessories Included | AC adapter (country dependant); rack mount adapters |
WIRELESS IN-EAR MONITORING SYSTEM WITH 100 SELECTABLE CHANNELS
Last Updated: Thu May 15 01:01:02 2008