The Sound Professionals Home Page
Cart: Items 0 Subtotal $ 0.00 Edit cart | Checkout
FREE shipping on most orders!

Click Here
for full size image

Part# - ATM2TL - Audio Technica - M2TL - M2 system stereo transmitter, 575.000-608.000 MHz (TV 31-36)_ - Item #14037
A lower price is available!
Click here
to join our FREE discount club!
Retail: $519.00   Your Price (USD): $349.00  You Save: 32.76%  
 
Part #: ATM2TL
Description:

M2L M2M, M2L-M2M, M2LM2M, M2RL M2RM

Manufacturer's website

***Information below is for the complete system (for your reference) this item is the receiver and earphone only***

The M2 Wireless In-Ear Monitor System is designed to make professional in-ear monitoring features accessible for performers who want to be free from the problems associated with floor wedges. The stereo monitor system offers Personal Mix Control, which gives each musician volume and mix control of two independent signals on stage, via easy-to-use controls on the M2R stereo body-pack receiver. The wireless UHF M2T Stereo Transmitter provides choice of 100 selectable frequencies and is equipped with two XLR/ combo input connectors into which users can connect line-level inputs. While up to 10 complete M2 systems may be used on stage simultaneously, any number of M2R stereo receivers may be used on the same frequency with single M2T stereo transmitter. These rugged systems are built to stand up to the inevitable bumps of life on the road, delivering clear, natural sound for touring and installed-sound uses.

    - High-fidelity sound with clean, articulate mix allows you to hear yourself better at lower volume
    - 100 selectable UHF channels
    - Up to 10 simultaneous systems per frequency band
    - Three receiver modes: Personal Mix, stereo, and mono
    - Personal Mix Control allows volume and mix control of two independent signals at the receiver
    - 3.5 mm line-in jack connects to ambient microphone, click track & more
    - LED indicators provide easy-to-read level monitoring
    - XLR loop output (true pass-through) connects signal to mixing console, additional IEM system or recording device with no signal degradation
    - Adjustable squelch eliminates annoying static
    - Pilot tone protects against RF interference when the transmitter is turned off
    - Limiter (defeatable) helps protect your hearing from sudden peaks
    - Portable system is quick to load and set up
    - Reduces on-stage audio clutter for better overall mix & less feedback
    - Use any number of M2R Stereo Receivers (with Personal Mix Control) on the same frequency
    - Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation
    - Personal fit with sizes of rubber eartips plus an ear-conforming foam tip
    - Auxiliary input offers connection point for ambient microphone, click track, or other mic- or line-level input.



M2 Components
EP3 Headphones
In-ear dynamic headphones offer high-fidelity sound and excellent isolation
M2T Stereo Transmitter
Wireless UHF transmitter (frequency-agile) offers 100 user-selectable frequencies
M2R Stereo Receiver
Personal Mix Control in lightweight body-pack

Compare the M2 & M3 Wireless In-Ear Monitor Systems.

Why choose in-ear monitors?


OVERALL SYSTEM SPECIFICATIONS
Operating Frequencies Band E: 790.000 to 822.000 MHz, 100 frequencies
Band F: 832.000 to 865.000 MHz, 100 frequencies
Band L: 575.000 to 608.000 MHz, 100 frequencies
Band M: 614.000 to 647.000 MHz, 100 frequencies
Not all frequency bands available in all areas. Please check with local regulations.
Minimum Frequency Step 25 kHz
Modulation Mode FM stereo
Maximum Deviation ±40 kHz
Dynamic Range 90 dB (typical), A-weighted
Total Harmonic Distortion <1% at (1 kHz, ±20 kHz Deviation)
Operating Range 100 (300'), typical
Open range environment with no interfering signals.
Operating Temperature Range -5 degrees (23 degrees F) to +50 degrees (122 degrees F)
Battery performance may be reduced at very low temperatures.
Frequency Response 60 Hz to 13 kHz (+/- dB)
Simultaneous Use 10 channels per band (maximum recommended)
For assistance with multi-band operation or other frequency coordination issues, please contact your local Audio-Technica customer service representative.


RECEIVER SPECIFICATIONS
Receiving System Double conversion superheterodyne
RF Sensitivity 20 dBuV (at 60 dB S/N ratio, 50 ohms termination)
Headphone Output Connector 3.5 mm TRS stereo phone jack
Headphone Output Power 65 mW (at 32 ohms)
Antenna Input SMA-type, 50 ohms
Aux Input Connector 3.5 mm TRS stereo phone jack
Batteries 2 1.5V AA (not included)
Battery Life 8 hours (alkaline)
Depending on battery type and use pattern
Dimensions 70.0 mm (2.76") x
25.0 mm (0.98") x
110.0 mm (4.33") H
Net Weight 110 (3.9 oz), without batteries
Accessories Included EP3 earphone; frequency sticker; flexible antenna


TRANSMITTER SPECIFICATIONS
RF Power Output 10 mW/30 mW (switchable), 50 ohms
Limited to 10 mW within 863 MHz to 865 MHz
Following national regulations
Spurious Emissions Following federal and national regulations
Input Connections XLRF-type/6.3 mm stereo (1/4") combination connector
Pin and Sleeve: Ground
Pin and Tip: Hot
Pin and Ring: Cold
Maximum Input Level XLRF-type/6.3 mm stereo, (1/4") balanced: +26 dBu
6.3 mm (1/4") mono, unbalanced: +26 dBu
Loop Output Connector XLRM-type connector
Pin 1: Ground
Pin 2: Hot
Pin 3: Cold
Power Requirement 12-18V DC, 600 mA
Antenna Attached whip
Dimensions 210.0 mm (8.30") x
132.0 mm (5.20") x
44.0 mm (1.70") H
Net Weight 870 (30.7 oz), without accessories
Accessories Included AC adapter (country dependant); rack mount adapters


Specifications:

Please see description for specifications

Customer Reviews:
Write an online review and share your thoughts with other viewers!

The Sound Professionals™, Inc.
3444 Sylon Blvd.
Hainesport, NJ 08036 USA
Upshot Commerce

Ecommerce

 

Shopping Cart Software by

 

Upshot Commerce