Click Here for full size image

Part# - MS-MULTITRACK-PRO-BUNDLE - Master Series by Sound Professionals - PRICE DROP! Professional 4 channel Multitrack/Mixer USB interface for Court Reporters using CAT software - with 4 high-gain microphones included - Item #B-15442

Retail: ~~$1799.95~~ Your Price (USD): $999.95 You Save: 44.45%

Part #: MS-MULTITRACK-PRO-BUNDLE

Description:

Instruction manual

Optional cases shown below
Waterproof hard case	Soft padded case
12.81" x 10.36" x 4.64" Weight 8lbs (including system)	11" x 8" x 5.5" Weight 7lbs (including system)

This interface is designed for all Court Reporters! With this bundle, you can connect up to 4 microphones, monitor what the microphones are picking up through headphones plugged into the interface and record from all microphones into your CAT program. The headphone monitoring is very powerful and adjustable. The level of each microphone can be adjusted individually.

There are four XLR microphone input jacks on the interface. Each jack will handle one microphone. Each jack provides "phantom power", needed to power most professional microphones. You can adjust the level of any microphone right on the interface.

The setup is simplicity itself - load the driver on your computer (supplied) and connect the USB cable between the interface and USB port on your computer. There are NO batteries anywhere in this system.

Need help? No problem - we can remote into your computer and set this up for you if needed.

Cardioid Lapel Microphone Specifications:


ELEMENT	Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN	Cardioid
FREQUENCY RESPONSE	40-16,000 Hz
LOW FREQUENCY ROLL-OFF	80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITY	-42 dB (7.9 mV) re 1V at Pa
IMPEDANCE	250 ohms
MAXIMUM INPUT SOUND LEVEL	141 dB SPL, kHz at percent T.H.D.
DYNAMIC RANGE (typical)	112 dB, kHz at Max SPL
SIGNAL-TO-NOISE RATIO	65 dB, kHz at Pa
PHANTOM POWER REQUIREMENTS	11-52V DC, mA typical

WEIGHT (MICROPHONE)	0.1 oz (2.8 g)

DIMENSIONS (MICROPHONE)	0.98 inches (25.0 mm) long, 0.40 inch (10.2 mm) diameter

OUTPUT CONNECTOR (POWER ADAPTER)	Integral 3-pin XLRM-type
CABLE	9.5 feet long (permanently attached to microphone), 3.2 mm (0.13 inch) diameter, 2-conductor, shielded cable
ACCESSORIES FURNISHED	AT8419 clothing clip; AT8116 windscreen; protective carrying case
AUDIO-TECHNICA CASE STYLE	M1

Omnidirectional Microphone Specifications:


Court Boundary Microphone

Details	Brand	Master Series by Sound Professionals
	Description	Professional Omnidirectional boundary microphone with ultra-high sensitivity, ultra-high gain, low-noise mic element and premium double-shielded cable
	Price each	$199.95
	Reviews	Number of Reviews: 2 Avg Score (out of 5): 5.0
	More Info/Add to Cart	View
Specifications	Frequency Response	20-20,000 Hz
	Signal To Noise Ratio	80dB
	Open Circuit Sensitivity	-24dB
	Maximum Input Sound Level	115dB/130dB
	Dynamic Range	96dB/110dB
	Polar Pattern	Omnidirectional
	Dimensions in inches	.50 x 2.00 x 2.00
	Cable Length	Optional Lengths
	Microphone Body Material	Metal and plastic
	Power Requirements	2-12vdc "plug in power", power from Battery Module, or phantom power with power converter adapter
Features	Interchangeable capsules available?	No
	Windscreens	N/A
	Croakie Option	N/A
	Clip availability	N/A